International Dialing; Volume Controls - NEC 535 Manual

International Dialing

Before you can enter a + symbol in a number, the cursor must be at the beginning of a number.
To make international calls:
*
Press and HOLD 0 to input the + symbol.
Input the country, area code (without the leading zero) and phone number that you wish to call.
When dialing, add the country code required. Storing all numbers with the country codes (e.g., 01 for the US, 44 for UK) is helpful.
A country code for another country is always the same, no matter what country you are dialing from. For example, to make an
international call to a typical UK number is entered as:
International Access
+
Call your Service Provider to activate international service options.
O
The '+" (plus) symbol for International access can be entered and used within phone numbers for speed dialing.

Volume Controls

To silence the ringer when receiving a call, the Ring silencer option must be set On.
*
(With flip CLOSED) Press a Side Volume button. Open the flip and press SEND to accept the call, and begin your
conversation.
(With flip OPEN) Press Side Volume button and accept the call
O
Do not press SEND, END, Softkey 1 or Softkey 2 if the Any Key Answer option is set on.
To change the earpiece volume during a call:
*
The flip cover must be open and press the Side Volume buttons. Press the Side Volume Up (+) increase volume and Side
Volume Down (-) to decrease volume.
The Side Volume buttons may be used to increase or decrease ringer volume when the hands-free accessory is connected.
During an incoming message, the Side Volume buttons adjust the ringer volume.
During the clock's daily alarm or Scheduler alarm, press a Side Volume button to silence the alarm, if the Ring silencer option is
set.
Country Code Area Code
44 1189
Phone Number
123456
33