Chipped Or Broken Teeth; Body Breakage Or Cracks From Back Edge; Tooth Strippage - Sharp SW-100T Instruction Manual

#5. Body Breakage Or Cracks From Back Edge

#6. Tooth Strippage

supply,improper ratio and/or improper application.

#4. Chipped Or Broken Teeth

Probable Cause :
A. Improper break-in procedure.
B. Improper blade selection for application.
C. Handling damage due to improper opening of
folded band.
D. Improper positioning or clamping of material.
E. Excessive feeding rate or feed pressure.
F. Hitting hard spots or hard scale in material
Probable Cause :
A. Excessive back-up guide "preload" will cause back
edge to work harden which results in cracking.
B. Excessive feed rate.
C. Improper band tracking – back edge rubbing heavy
on wheel flange.
D. Worn or defective back-up guides.
E. Improper band tension.
F. Notches in back edge from handling damage
Probable Cause :
A. Improper or lack of break-in procedure.
B. Worn, missing or improperly positioned chip brush.
C. Excessive feeding rate or feed pressure.
D. Movement or vibration of material being cut.
E. Improper tooth pitch for cross sectional size of
material being cut.
F. Improper positioning of material being cut.
G. Insufficient sawing fluid due to inadequate
H. Hard spots in material being cut.
I. Band speed too slow for grade of material being
cut.