Table of Contents
Advertisement
Section 3
MOVING &
INSTALLATION
LOCATION & ENVIRONMENT
UNPACKING & INSPECTING
LIFTING
REMOVING SHIPPING BRACKET
CLEANING
INSTALLING
RELOCATING
LOCATION & ENVIRONMENT
For your safety, please read all information regarding installation before proceeding. Install your machine
in a place satisfying all of the following conditions:
Space:
Leave enough free space around the machine for loading work and unloading cut-off pieces as
well as for maintenance and inspection. Refer to Section 2 General Informattion for machine
dimensions and floor space.
Environment:
Well lighted
Floor kept dry at all times in order to prevent operators from slipping.
Away from direct exposure to the sunlight
Room temperature between 5˚ C to 40˚ C .
Humidity level kept at 30~95%"(without condensation) to avoid dew on electric installation
and machine.
Away from vibration of other machines
Away from powders or dusts emitted from other machines
Avoid uneven ground. Choose a solid level concrete floor which can sustain weight of both
machine and material.
Limit the operation area of the machine to staff only.
(500 lumen at minimum).
Advertisement
Chapters
Table of Contents
