Table of Contents
Advertisement
Section 9
TROUBLESHOOTING
INTRODUCTION
PRECAUTIONS
GENERAL TROUBLES & SOLUTIONS
MINOR TROUBLES & SOLUTIONS
MOTOR TROUBLES & SOLUTIONS
BLADE TROUBLES & SOLUTIONS
SAWING PROBLEMS & SOLUTIONS
RE-ADJUSTING THE ROLLER TABLE
INTRODUCTION
All the machines manufactured by us pass a 48 hours continuously running test before shipping out and
we are responsible for the after sales service problems during the warranty period if the machines are
used normally. However, there still exist the some unpredictable problems which may disable the
machine from operating.
Generally speaking, the system troubles in this machine model can be classified into three types, namely
GENERAL TROUBLES, MOTOR TROUBLES and BLADE TROUBLES. Although you may have other troubles
which can not be recognized in advance, such as malfunctions due to the limited life-span of mechanical,
electric or hydraulic parts of the machine.
We have accumulated enough experiences and technical data to handle all of the regular system
troubles. Meanwhile, our engineering department had been continuously improving the machines to
prevent all possible troubles.
It is hoped that you will give us your maintenance experience and ideas so that both sides can achieve
the best performance.
PRECAUTIONS
When an abnormality occurs in the machine during operation, you can do it yourself safely. If you have
to stop machine motion immediately for parts exchanging, you should do so according to the following
procedures:
• Press HYDRAULIC MOTOR OFF button or EMERGENCY STOP button.
• Open the electrical enclosure door.
• Turn off breaker.
Advertisement
Chapters
Table of Contents
