Closing The Casing - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Closing the casing

1
Ê
Place the top cover on the casing base (1) so that the distance (a) is approximately 10 mm.
Ê
Push the top cover in the direction of the arrow (2) until it engages.
Ê
Lock the casing by pushing the locking slide (3) to the right in the direction of the arrow
("close") past a slight resistance until it engages.
Ê
Lock the casing again if necessary.
Ê
Return the system unit to its original position.
Ê
If you have disconnected cables, reconnect them to the connectors on the rear panel.
Ê
Replace any anti-theft protection devices.
A26361-K650-Z100-1-7619
a
System expansions
3
37