Fagor LP 0820 User Manual page 16


Create programme: Creation of new wash programmes using cycles existing in the
library. When this button is pressed, the user is asked to enter the name of the new
programme. Next the following screen is displayed (without any cycles) in order to include
cycles from the cycle library.
Cycles can be added from the cycle library. The cycles you wish to view can be filtered by
cycle type. After selecting the cycle, the library cycle parameters can be consulted before
including them in the programme you are creating.
Each programme is a set of parameters grouped by cycles that are not linked to any of the
cycles found in the library.

Copy programme: Copy of a programme found in the library, giving it a new name.

Modify programme: Modification of the name of the programme and the cycles in
the programme. It is possible to add, modify, delete or change the order of existing cycles.
Just as when a new programme is created, when it is modified it is possible to add/delete
cycles from the cycle library.
When creating programmes, the cycle parameters can only be consulted. The cycles already
in the programme can only be modified when modifying the programmes.

Delete programme: Delete programmes stored in the library.

Import programme: Permits new programmes to be imported from a USB flash
drive.
When the USB is opened, only files with the extension ".prg" are displayed, in addition to the
folders. There is a button for selecting all the programmes in the currently open folder.
If a programme is imported with the same name as an existing programme, you will be asked
whether you wish to replace the programme in question or cancel the operation. As there
may be many programmes in this situation, there is a box to select "do the same in all cases".

Export programme: Export programmes existing in the library to a USB flash
drive.
It is possible to select the programmes you wish to export.
Translation of original instructions.
EN
Page 20 of 42