Before Proceeding - Screen Innovations Zero-G Owner's Manual

BEFORE PROCEEDING

CAUTION: READ THE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
PROCEEDING. ACTIONS CONTRARY TO THE INSTRUCTIONS INVALIDATE
THE WARRANTY AND MAY RESULT IN SERIOUS DAMAGE AND/OR INJURY.
INSTALLER:
• Blocking is required. The ceiling or wall used for fixture
installation must be able to support 300 lbs or more.
Failure to properly secure the screen may result in
injury and/or damage.
• Electrical work should be performed using appropriate
electrical codes and regulation, by a licensed electrical
professional.
• Before running cables in walls or ceilings see controls
section on pages 22,23 and 25 for control cable
requirements.
• Before removing the screen from the box, check for
damage and to make sure all parts are included.
• Do not use any sharp blades when opening the screen
packaging. Open by hand.
• Do not pull on the sides, crease, or fold the screen. The
screen material is very delicate.
• Care in mounting and correct operation will result in
long and satisfactory service from the SI screen.
• The screen should be level when installed. Always use
a carpenter's level.
• Nothing should be fastened to any part of the screen
assembly.
NOTE: The screen has been thoroughly inspected and
tested at factory and found to be operating properly prior to
shipment.
6
END USER:
• To prevent damage, the operating and maintenance
of the screen should be performed by experienced
professionals.
• This is a finished product. Do not write or draw on the
surface.
• Do not put anything near or under the screen that
would come in contact or impede the normal
operation of the screen when deployed.
• Damage to the screen can result if an object prevents
the screen from fully deploying.
ZERO-G