Low Voltage Trigger (Optional); Wall Switch - Screen Innovations Zero-G Owner's Manual

LOW VOLTAGE TRIGGER (OPTIONAL)

Some projectors may have a low-voltage trigger that will allow your screen
to drop when it is turned on. Installer must supply conductor wire in the

WALL SWITCH

Wall Switch
RJ9
Use the supplied cable for all set-up procedures. It is recommended to
permanently install the wall switch in an accessible location for future limit
setting and troubleshooting procedures. Plug in the RJ45 end into the
control center, and plug the smaller RJ9 end into the wall switch.
112216ZGFL
Tip DC +3V to +12V
50mA min
Sleeve
length and guage needed..
9 ft (2.75m) Provided
If Longer cable is needed it must be shielded
Shielded 2 Conductor wiring
18 Gauge or Larger
65ft (20 m) Max
RJ45
ZERO-G
23