Screen Innovations Zero-G Owner's Manual page 29

SETTING THE DROP
3
TOP OF VIEWING SURFACE
Hold the down button on the remote to drop the screen and release
at the desired drop. The top of the viewing area is indicated on the
protective tube. Make sure to remove any foam remaining inside the
112216ZGFL
DO NOT EXCEED THE MAXIMUM DROP OF
60-INCHES (152.4 CM).
THE MOTOR IS THERMALLY PROTECTED. IF THE MOTOR
STOPS RUNNING DURING SETUP, LET IT COOL DOWN FOR AT
LEAST 30 MINUTES BEFORE ATTEMPTING TO RUN IT AGAIN.
DESIRED DROP (60" MAX)
case if it did not lower with the screen.
ZERO-G
29