Lowering The Viewing Area (If Necesarry) - Screen Innovations Zero-G Owner's Manual

LOWERING THE VIEWING AREA
1
If it becomes necessary to lower the viewing area, hold the up button
on the wall switch to raise untill it is nested in the wing, and tension
112216ZGFL
DO NOT EXCEED THE MAXIMUM DROP OF
60-INCHES (152.4 CM).
THE MOTOR IS THERMALLY PROTECTED. IF THE MOTOR
STOPS RUNNING DURING SETUP, LET IT COOL DOWN FOR AT
LEAST 30 MINUTES BEFORE ATTEMPTING TO RUN IT AGAIN.
has been taken off of the wing cable.
ZERO-G
49