Ir Remote (Optional) - Screen Innovations Zero-G Owner's Manual

IR REMOTE (OPTIONAL)

• If the IR remote is held down continuously as the screen is moving there
is a chance that the screen can stop in-between limits. If this happens
simply send another IR signal in the direction it was going to continue its
movement.
• If a control system is using an IR blaster to control this screen, make sure
to limit the period where it blasts the signal one second or less.
These codes are to be programmed into 3rd party universal control systems.
24
IR Remote Use
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb
0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb
0006 011b 0006 08a4
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb
0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b
0006 011b 0006 08a4
0000 006c 0000 000c 0006 011b 0006 011b 0006 00bb 0006 00bb
0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 00bb 0006 011b
0006 00bb 0006 08a4
Hex Codes
ZERO-G