Raising The Viewing Area (If Necesarry) - Screen Innovations Zero-G Owner's Manual

RAISING THE VIEWING AREA ZERO-G
THE MOTOR IS THERMALLY PROTECTED. IF THE MOTOR
STOPS RUNNING DURING SETUP, LET IT COOL DOWN FOR AT
LEAST 30 MINUTES BEFORE ATTEMPTING TO RUN IT AGAIN.
1
DESIRED DROP (60" MAX)
TOP OF VIEWING SURFACE
If it becomes necessary to raise the viewing area, hold the up button on
the wall switch to raise the screen to the desired viewing height. Release
the up button when the top of the viewing area is at the desired location.
44