Adjusting Screen Tension - Screen Innovations Zero-G Owner's Manual

ADJUSTING SCREEN TENSION

TURNING THE WING ADJUSTMENT SCREW COUNTERCLOCKWISE PAST THE
FACTORY SET POSITION CAN RESULT IN THREADING THE SCREW OUT OF THE
ADJUSTER INSIDE THE WING AND WILL BE DIFFICULT TO THREAD BACK IN.
If the screen is loose on one side. Then use the included L key to turn
the wing adjustment screw CLOCKWISE on the LOOSE side untill the
screen material tightens up to visually match the other side. As a final
check measure the wing to bottom tube distance on both sides and
IF YOU ARE HAPPY WITH THE VIEWING AREA HEIGHT THEN YOUR INSTALLATION
STOP
IS COMPLETE. IF YOU NEED TO CHANGE THE HEIGHT THEN SEE THE FOLLOWING
PAGES TO CHANGE THE DROP.
112216ZGFL
make sure they are equal within 1/8''.
ZERO-G
43