Programming The 24 Hour Digital Timer - Webasto Thermo Top C Installation Instructions Manual

Thermo Top C
Programming the 24-Hour Digital Timer
Programming the 24 Hour Digital Timer with 3 Time Settings
Heater Operation Indicator
Reverse
(viewing
the time)
Symbol for
Setting / Viewing
the Time
Manual Operation
Operation.
Operation of the timer is designed so that the symbols flash rapidly in the setting mode. If no
button is pressed within 5 seconds, the displayed time will be saved.
The display changes at high speed when the
seconds.
Whenever the power supply to the timer is disconnected, all previously programmed settings
will be lost.
Switching On.
Manually: by pressing the "Manual Operation"
The heating time and the symbol for heating operation
The heating time display disappears after 10 seconds.
Automatically: upon reaching the preset starting time for heating.
The program number and the symbol for heating
Switching Off.
Manually: by pressing the "Manual Operation"
Automatically: via the programmed end time.
The display field goes out when the heating time expires.
Setting the Time.
This function is not available when heating mode is active!
Press and hold the
The time of the day is displayed and the clock symbol
Set the time via the "Forward"
The set time is saved when the display goes out or by pressing the
Viewing the Time.
Press the "Forward"
NOTE:
The remaining operating time is displayed if heating mode is active.
Time / Remaining Time
button. Press the "Forward"
or "Reverse"
or "Reverse" button.
Ventilation Mode Indicator
Forward
(viewing
the time)
Program
Selection
Program Number Indicator
and buttons are pressed for more than 2
button (continuous heating mode).
are displayed.
are displayed.
button.
or "Reverse" button as well.
flashes.
buttons.
button.
31
* ventilation mode not
*
available on BlueHeat