Foscam FI9903P User Manual page 29

Section7 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section8 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings > Basic settings > Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings > Basic settings > Camera time panel and adjust the device time.
Go to Settings > Video > On Screen Display panel, you can add or no add OSD.
Section9 Play / Stop / Talk / Audio / Snap / Record / Full screen button
1
1------Play Click it to play the video of the camera
2------Stop Click it to stop the video of the camera
3------ Talk Click the button and the icon will become to
PC, people around the camera can hear your voice if the camera has connected with audio output device.
Click the icon again and stop talking.
4------ Audio Click the button and the icon will become to
the camera has connected with other audio input device through the Audio Input port of the camera, Click the
icon again and stop audio.
5----- Volume Click the button and the icon will become to
6----- Snap Click it to make snapshot and it pop up a window which picture you snapshot, right click in the
window and save the picture to anywhere you want.
7----- Record Click the icon
Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path:
Go to Settings > Record > Storage Location panel.
2
3 4
and the camera start recording, you can see a green dot in the live window.
5
6
, then talk to the microphone that connected with
, you can hear the sound around the camera if
25
8
7
, you can set the volume.