Foscam FI9900P Quick Installation Manual

1
Quick Installation Guide
Package Contents
Outdoor HD IP Camera
Model: FI9803P Model: FI9900P / FI9800P
Security Warning
Please change the password of your Foscam APP account and
camera username regularly, the password should be the combination
of numbers, letters and special characters.
Please keep the username and password of your camera and Foscam
APP account safe.
Please update your camera to the latest rmware every three
months, which make you have better product experience and ensure
V1.9
the safety of your camera.
EQ980314
2
Installation Notice
FI9803P
IP Camera
Power Adapter Resource CD Wi-Fi Antenna
Infrared Lamp Array
WARRANTY CARD
Quick Installation Guide
~~~~~~~~~~~~~~~~~~~~~~
Outdoor HD IP Camera
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
Model: FI9803P Model: FI9900P / FI9800P ~~~~~~~~~~
Mounting Bracket
Quick Installation Guide Warranty Card
(only for FI9803P)
FI9900P / FI9800P
Infrared LED
Induction IC
3
Physical Description
Antenna
Download and install Foscam APP from Apple APP Store or Google
LENS Play Store, or scanning the QR code to download and install directly.
LAN
Induction IC
Power
Reset Button
Before you continue, please note:
Antenna
LAN
LENS
Audio in/out
Power
Reset Button
Access IP Camera via APP
3.1 Wired Connection
Wired Connection
(Recommended)
Register APP Account
Download APP
Wireless Connection
Change Camera
Live Video Setting & Monitoring
Username & Password
Foscam
Make sure your router is enabled DHCP, and connected to internet.
Make sure your smartphone is connected to your router and located
near the camera.
You can experience new features, including EZLink, Online-Update,
Message Push, etc., ONLY on "Foscam" APP. Any other third-party
APP, other than "Foscam", can't support all these new features.
It recommends that the smartphone has the following con guration:
1. Only use the "Foscam" APP.
2. IOS: system version 8.1 and above.
3. Android: systetem version 4.1 and above, and the
smartphone has a Graphics Processing Unit (GPU) function.
(recommended)
WPS WPS
1. Connect the camera with power adapter.
2. Connect your camera with router by Ethernet cable.
Make sure your smartphone is connected to your router.
3.
4. Run the Foscam APP on your smartphone, register a Foscam
Cloud account then log in. Please follow the steps below to add your
camera.
My Cameras
Setup Wizard Setup Wizard
Scan
Add New Camera
Please scan the QR code on
your camera to add.
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
√
Tap '+' to add new camera
Connection succeeded！
Tap the camera in the list to
Tap to scan QR Code watch live video.
轻触扫描二维码
Album
Tap here Tap here Scan the QR code Connection succeeded!
Note:
If you have added your IP camera successfully by wired connection,
please do not add it again by wireless connection.