Foscam FI9905B User Manual
  1. Manuals
  2. Brands
  3. Foscam Manuals
  4. Security Camera
  5. FI9905B
  6. User manual

Foscam FI9905B User Manual

Outdoor hd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User
Manual
User
Manual
Outdoor HD IP Camera
Model: FI9903P
Model: FI9905B
Model: FI9900P / FI9800P
Model: FI9900EP / FI9901EP

Advertisement

Table of Contents
loading

Related Manuals for Foscam FI9905B

Summary of Contents for Foscam FI9905B

  • Page 1 User Manual User Manual Outdoor HD IP Camera Model: FI9903P Model: FI9905B Model: FI9900P / FI9800P Model: FI9900EP / FI9901EP...
  • Page 2 Model: FI9803EP Model: FI9803P Model: FI9804W Model: FI9805W Model: FI9805E V3.8.4...

  • Page 3: Table Of Contents

    Table of Contents Security Warning...................................1 1 Overview..................................... 1 1.1 Key Features................................1 1.2 PoE (Power over Ethernet-FI9805E / FI9803EP / FI9900EP / FI9901EP)..........2 1.3 Read before Use..............................2 1.4 Packing Contents..............................2 1.5 Physical Description.............................. 3 1.6 SD Card Management............................6 1.7 Wall Installation..............................
  • Page 4 6.4 CE & FCC................................82 6.5 WARRANTY................................. 83 6.6 Statement................................85 7 Obtaining Technical Support............................86...

  • Page 5: Security Warning

    FOSCAM provides Phone apps for Android and iPhone users, please search and install app on app Store and Google Play for iOS and Android devices, then you can view your camera anywhere, anytime on your smart mobile devices.

  • Page 6: Poe (Power Over Ethernet-Fi9805E / Fi9803Ep / Fi9900Ep / Fi9901Ep)

     Supports multiple network protocols: HTTP / HTTPS / RTSP / TCP / IP / UDP / FTP / DHCP ONVIF  Providing Central Management Software to manage or monitor multi-cameras  Supports magic zoom (FI9900P, FI9905B, FI9900EP, FI9901EP)  Supports High Dynamic Range (FI9900P, FI9905B, G2, FI9900EP, FI9901EP) 1.2 PoE (Power over Ethernet-FI9805E / FI9803EP / FI9900EP / FI9901EP) The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable.

  • Page 7: Physical Description

    Mounting Bracket * 1 (except for FI9900P, FI9905B, G2, FI9900EP, FI9800P, FI9901EP)  1.5 Physical Description 1.5.1 Front Panel Front Panel for FI9804W / FI9805W / FI9805E 1 WIFI Antenna: Wireless Antenna (FI9804W, FI9805W) 2 Infrared LED: 12 IR LEDs (FI9804W), 36 IR LEDs (FI9805W, FI9805E)
  • Page 8 1 LENS: CMOS sensor with fixed focus lens 2 Infrared Lamp Array 3 Induction IC Front Panel for FI9900P / FI9905B / FI9900EP / FI9800P / FI9901EP 1 WIFI Antenna: Wireless Antenna (FI9900P / FI9800P / G2) 2 Infrared LED: 30 IR LEDs...
  • Page 9 1.5.2 Interface I / O alarm terminal block (Only FI9805E) This network camera provides a I/O alarm terminal block which is used to connect to external input / output device. The pin (there are four number in the terminal block from no. 1 to no. 4) definitions are as follows: 1–...

  • Page 10: Sd Card Management

    1.5.3 Bottom View There are up to two labels located at the bottom of the camera, this is an important feature of original Foscam cameras. If your camera does not have labels, it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for technical services.

  • Page 11: Wall Installation

    FI9901EP FI9900P / FI9905B / FI9900EP NOTE: When you re-install the camera, please ensure the tightness with the camera. 1.7 Wall Installation FI9803EP / FI9803P / FI9903P Step 1: Screw the mount on the wall with the 3 screws provided.
  • Page 12 FI9800P / FI9900P / FI9905B / FI9900EP / FI9901EP Fixate the camera on your preferred location and use screws to mount it. We have provided screws in the Packaging. NOTE: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant.

  • Page 13: The Different Features Between The Models Involved

    1.8 The Different Features between the Models Involved Differences Model Wireless PoE (Power over Alarm In / Out Audio Input / Output RS485 Ethernet) FI9804W FI9805W FI9805E FI9803EP FI9803P FI9903P FI9900P FI9905B FI9900EP FI9800P FI9901EP...

  • Page 14: Access The Ip Camera

    1. Mount the antenna and make it stand vertically (Only for the device with external antenna). 2. Connect the camera to the LAN network (Router or Switch) via network cable. 3. Connect the power adapter to the camera. 4. Visit Foscam official website http://www.foscam.com , select “Support > Download Center > Software Tools”, then you can find the “Equipment Search Tool”, download the tool to your computer, the icon shows as below:...
  • Page 15 Double click the IP address of the camera; the camera login page should be open in your default browser. (2) Https:// LAN IP + Https Port no. The default HTTPS port NO. is 443. You can use the URL to access the camera: https:// LAN IP + HTTPS port Go to Settings - Network - Port panel, you can see and change the HTTP and HTTPS port NO.

  • Page 16: Access The Camera In Wan

    2.3 Access the Camera in WAN 2.3.1 Static IP Addresses Users with static IP addresses after you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public website ? To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The webpage at this address will show you the current WAN IP.
  • Page 17 Videostream: Here support three modes: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example: IP: 192.168.1.11 Port number: 88 User name: admin Password: 123...
  • Page 18 Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview.

  • Page 19: Ip Camera Connection To The Server

    If you cannot play the video in the VLC player, please check the port mapping. NOTE : If you modify the camera's username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 2.5 IP Camera Connection to the Server Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.

  • Page 20: Surveillance Software Gui

    3 Surveillance Software GUI Please refer to the section 2.1 if you install the camera for the first time. You can start to learn about software operation after finish quick installation. 3.1 Login Window Section1 Enter the Username and password The default administrator username is admin with no password, please change the password at first using and prevent unauthorized users login the camera.
  • Page 21 After logging in for the first time, you will go to Setup Wizard automatically. Here you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration. Country: Select the country. Device Name: You could give name for your camera. System Time: Select the time zone you need to set the date, time,format, etc.
  • Page 22 Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password. IP: Set IP address of the camera. You could choose to obtain an IP automatically or set the IP address according to your needs.

  • Page 23: Surveillance Window

    NOTE: It needs about 1 minute to connect the camera to your router. 3.2 Surveillance Window Differences Model Playback Pan / Tilt Control Zoom out / Zoom in Cruise FI9804W FI9805W FI9805E FI9803EP FI9803P FI9903P...
  • Page 24 FI9800P FI9901EP Section1 FOSCAM Logo / LiveVideo / Settings buttons : FOSCAM LOGO : Path to surveillance window. Click this button and back to the surveillance window : Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings.
  • Page 25 WDR (Only FI9900P, FI9905B, FI9900EP, FI9901EP): WDR stands for High Dynamic Range. It usually refers to the method of capturing images having "greater dynamic range between the lightest and darkest areas of an image than current standard digital imaging methods or photographic methods". You can select ON from the dropdown list under sunlight or with bright background.
  • Page 26 Section5 Cruise settings ( only F9805E) If via RS485 interface to connect an external PT device, you can use this feature. The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right.
  • Page 27 Section7 Image quality settings In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality. Section8 If you have added time and camera name in the video, you can see it in the live window. Go to Settings >...
  • Page 28 8------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Keep Ration: Select it and the camera will adjust the size of live window based on the computer monitor automatically.
  • Page 29 Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom Up / Down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. NOTES 1.

  • Page 30: Advanced Camera Settings

    4 Advanced Camera Settings Click the button Settings, goes to Administrator Control Panel to make advanced camera settings. 4.1 Setup Wizard The way to set it, you could refer to section 3.1. 4.2 Device Status Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera.
  • Page 31 the time. System Firmware Version: Display the System Firmware version of your camera. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera 4.2.2 Device Status On this page you can see device status such as Alarm status, NTP, WIFI status and so on. 4.2.3 Session Status Session status will display who and which IP is visiting the camera now.

  • Page 32: Basic Settings

    4.2.4 Log The log record shows who and which IP address accessed or logout the camera and when. Click the page number and go to the corresponding page to see more logs . Fill in one page number, click Go button and go to the corresponding page .
  • Page 33 Time Zone: Select the time zone for your region from the drop-down menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC / Terminal: Select this option to synchronize the date and time of the Network Camera with your computer.
  • Page 34 How to change the password? Firstly, select the account which you want to change the password, then select Change Password, enter the old password and the new password, lastly click modify to take effect. How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list.
  • Page 35 The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window.
  • Page 36 1 Click it, camera model, alias, host and HTTP Port will be filled in the following boxes automatically . 3 Click Add to take effect . 2 Enter the User name and password of the 2nd camera . Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to.
  • Page 37 4.3.5 Voice Prompt On this page, you can enable or disable voice prompt. Select “Yes” to enable or select “No” to disable. If select ”Yes”, you can hear the voice prompt after connect the audio output device.

  • Page 38: Network

    4.4 Network This section will allow you to configure your camera's IP, PPOE, Wireless Settings, Port, Mail Settings and FTP Settings. 4.4.1 IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer.
  • Page 39 If you don't know the DNS server, you can use the same settings as the Default Gateway. 4.4.2 Wireless Settings (FI9803P / FI9804W / FI9805W / FI9900P / FI9905B / FI9800P) Step 1: Choose Settings on the top of the camera interface, and go to the "Network" panel on the left side of the screen, then click Wireless Settings.
  • Page 40 your router in the list. Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than 10. Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically.
  • Page 41 Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a wireless connection.
  • Page 42 Another way to change the HTTP port no. Step 1: Open the Equipment Search Tool, select the camera you would like to change the port of, right click on the IP address, and click on "Network Configuration", this brings up the network configuration box . Select which camera you’d like to change the port for, and right click .
  • Page 43 address is now fixed at a static IP address of http://192.168.1.105:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address.
  • Page 44 2-----SMTP Username / password ID account and password of the sender email address 3----- Sender E-mail Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers 5----- Save Click Save to take effect 6----- Test Click Test to see if Mail has been successfully configured.
  • Page 45 FTP server: If your FTP server is located on the LAN, you can set as Figure as above. If you have an FTP server which you can access on the internet, you can set as below. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly.

  • Page 46: Video

    4.4.7 P2P (Except FI9804W / FI9805W / FI9805E) Access the camera by smart phone (Android or iOS operating system),please refer to the Quick Setup Guide. First of all, you need to open the P2P function of the camera at Settings > Network > P2P. 4.5 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings.
  • Page 47 Rate Control Mode (FI9900P, FI9905B, FI9900EP, FI9901EP，G2): There are three rate control modes. CBR: Constant Bit Rate, it means that the Bit Rate is constant.
  • Page 48 This page is used to add privacy zone on the video. Allow On Screen Display Mask There are two options: Yes or NO. Select yes and draw a mask area on the video, the mask area will be black on the video. The privacy zone Click OK button and return to the Privacy Zone page, click Save to take effect.
  • Page 49 FTP or SD card automatically. If you select the FTP, you can set the file name which the picture save to. For example: file name is "NAME", the snapshot picture is "NAME_20150605-180000.jpg". Only FI9803EP, FI9900P, FI9905B, G2, FI9900EP support SD card.

  • Page 50: Detector

    Enable timing to capture To enable capture interval, follow the steps below: 1 Select Enable timing to capture 2 Capture interval: The interval time between two captures. 3 Select the capture time  Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture.
  • Page 51 To enable motion detection, follow the steps below: 1 Enable Motion detection 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger interval--- The interval time between two motion detections. Here supports 5s / 6s / 7s / 8s / 9s / 10s / 11s / 12s / 13s / 14s / 15s.
  • Page 52 If you select this checkbox, when the motion has been detected, the camera will push the message to the phone which has been connected the camera. 5 Set detect area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings.
  • Page 53 C Press the left mouse and drag it on the time boxes, you can select the serial area, 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE : You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
  • Page 54 If the Sensitivity is set to High, the camera will detect the sound whose more than 55db. If the Sensitivity is set to Medium, the camera will detect the sound whose more than 65db. If the Sensitivity is set to Low, the camera will detect the sound whose more than 75db. If the Sensitivity is set to Lower, the camera will detect the sound whose more than 85db.
  • Page 55 There is an IO alarm input / output lines in the FOSCAM camera tails. Enable IO alarm need this cable to connect to the alarm device (door sensor, infrared sensor, smoke detector, etc.). I/O Alarm has four ports: Port 1 and port 2 indicate IO alarm input ...

  • Page 56: Record

    4.7.1 Storage Location Recording Location: SD card, FTP. SD card (Only FI9803EP / FI9900P / FI9905B / G2 / FI9900EP / FI9901EP): The video will be saved in SD  card. Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD card.
  • Page 57 .7.2 Alarm Record 4.7.3 Local Alarm Location On this page you can enable local alarm record, and select the local alarm record time. 4.7.4 Schedule Recording When the video is selected as FTP, the device supports scheduled recording.
  • Page 58 When the video is selected as SD card, the device supports pumping frame recording (FI9803EP, FI9900P, FI9905B, FI9900EP, G2 support SD card).
  • Page 59 The schedule recording will stop while alarm recording is beginning, and it will continue automatically after  alarm recording end. 4.7.5 SD Card Management (FI9803EP / FI9900P / FI9905B /FI9900EP / FI9901EP) The SD card Slot inside the camera, if you want to install or remove the SD card, you need to open the camera.

  • Page 60: Ptz (Only Fi9805E)

    4.8 PTZ (only FI9805E) This page will allow you to change the pan / tilt speed and do RS485 settings (Only FI9805E have this feature). 4.8.1 Pan / Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired pan / tilt speed type and click save button .

  • Page 61: System

    Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera.
  • Page 62 4.10.2 System Upgrade Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally. Your current firmware version will be displayed on your screen. You may go to the Status > Device Information page to check for the latest firmware versions available.
  • Page 63 CAUTION: We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. NOTE: 1) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
  • Page 64 power during it installing. After installing is complete, you will receive a system prompt. 4.10.4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. The default administrator username is admin with a blank password. 4.10.5 Reboot Click Reboot to reboot the camera.

  • Page 65: Playback (Fi9803Ep / Fi9900P / Fi9900Ep)

    5 Playback (FI9803EP / FI9900P / FI9905B/ FI9900EP) On this page you can view the record files stored in the SD card. Section 1 Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually.
  • Page 66 Section 2 Search record files On this panel you can see all record files satisfy the conditions you set. Section 3 Play / Stop / Audio / Full screen Buttons Please select one record file before use these buttons. Click this button to play the record files Click this button to stop the record files Open or stop audio Click this button to make full screen, and double click left mouse to exit full screen.

  • Page 67: Appendix

    6 Appendix 6.1 Frequently Asked Questions NOTE: Any questions you would meet, please check Network connections firstly. Check the working status revealed by the indicators on the network server, hub, and exchange. If abnormal, check the network connections. 6.1.1 Equipment search tool cannot find the camera After power on camera and connect it to router by Ethernet cable, open Equipment Search Tool it cannot find any camera IP address.
  • Page 68 6.1.2 Install plugin for Internet Explore Suggest use IE browser to log in the camera and install the plugin for the first time, then you can use it on other browser as well. Just remember to allow the plugin to run. See below for steps to install plugin via IE browser. Step 1: User IE browser to log in the camera for the first time, it will prompt to ask your install the plugin on the bottom of IE browser.
  • Page 69 Please click it to download plugin and follow wizard to install. See this link for help if after installed plugin but still cannot login camera: http://www.foscam.com/faqs/view.html?id=14 6.1.3 Unable to connect to router wirelessly After setup wireless configuration, and input the wireless password correctly, save the settings. Normally, after you disconnect the Ethernet cable, wait for few minutes camera will show up again in Equipment Search Tool (or show up in router’s DHCP client list/LAN list) with a new IP address.
  • Page 70 (3) Once reset, camera will be restored to default settings. And default username is admin, no password (leave password blank). 6.1.5 How to setup alarm recording to SD card (FI9803EP / FI9900P / FI9905B / FI9905B / FI9900EP / FI9901EP)
  • Page 71 (2) Choose Recording for the alarm action. (3) Set the Detection Area (4) Set a Schedule. (5) Click Save to save the settings. Note: 1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red. 2) Please make sure your camera time is correct. 3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids.
  • Page 72 6.1.6 How to setup alarm Emails Setup alarm Emails, when camera detects a motion it’ll send Email with snapshot to inform about the motion alarm. Steps as below. Step 1: Setup Mail Settings Before you set, please make sure that your email for sender enabled SMTP. And get your Email SMTP server, SMTP port, TLS information ready.
  • Page 73 (4) Also, if camera’s firmware is too old that doesn’t support the browser and unable to install plugin will cause the same issue. Please update firmware of the camera to latest first. 6.1.8 Unable to connect camera remotely using Foscam app Foscam P2P cameras allow users to connect camera remotely using Foscam app without extract setup like...

  • Page 74: Default Parameters

    6.1.9 Camera is added by others When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the same time. To solve error “This camera has already been added by another account” when add camera to Foscam app or cloud, please send a clear photo of camera’s model sticker to Foscam support email...
  • Page 75 Infrared mode Automatic or manual With 1 Infrared Lamp Array, IR LEDs for IR range up to IR range 20m / 66ft Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE 802.11b / g / n IEEE802.11b: 11Mbps (Max.); IEEE802.11g: 54Mbps (Max.); Data Rate IEEE802.11n: 150Mbps (Max.).
  • Page 76 Diagonal :75º Image Compression H.264 Image Frame Rate 30fps (60Hz), 25fps (50Hz), downward adjustable Resolution 720P (1280 * 720), VGA (640 * 480), QVGA (320 * 240) Stream dual stream The hue, brightness, contrast, saturation, sharpness are Image adjustment adjustable Video Flip image flip and mirror...
  • Page 77 Aperture F1.2 Lens Horizontal:70º Angle of View Diagonal: 75º Image Compression H.264 Image Frame Rate 30fps (60Hz), 25fps (50Hz), downward adjustable 1080P (1920 * 1080), 720P (1280 * 720), VGA (640 * Resolution 480), QVGA (320 * 240) Stream dual stream The hue, brightness, contrast, saturation, sharpness are Image adjustment adjustable...
  • Page 78 Display Resolution 1280 * 720 (1.0 Megapixels) Min. Illumination 0 Lux (with IR Illuminator) Lens Type Glass Lens focal length f:2.8mm Aperture F1.2 Lens Angle of View 70º Image Compression H.264 Image Frame Rate 30fps (60Hz), 25fps (50Hz), downward adjustable Resolution 720P (1280 * 720), VGA (640 * 480), QVGA (320 * 240) Stream...
  • Page 79 Temperature Operating Humidity 10% ~ 80% non-condensing Storage Temperature -20ºC ~ 60ºC (-4ºF ~ 140ºF) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS Specification FI9805W Image Sensor High Definition Color CMOS Sensor Display Resolution 1280 * 960 (1.3 Megapixels) Image Sensor Mini.
  • Page 80 Microsoft Windows 2000/XP, Vista 7; Supported OS Mac OS iOS, Android IE8 and above version or compatible browser, Firefox, Browser Chrome, Safari or other standard browsers Upgrade Upgrade from network Software IC, CE, FCC, RoHS Certification Specification FI9805E Image Sensor High Definition Color CMOS Sensor Lens f : 4mm...
  • Page 81 Chrome, Safari or other standard browsers Software Upgrade Upgrade from network CE, FCC, RoHS Certification ITEMS FI9900P FI9905B Sensor High Definition Color CMOS Sensor Image Sensor Display Resolution 1920 * 1080 (2.0M Pixels) Min. Illumination 0 Lux (With IR Illuminator)
  • Page 82 Audio Compression PCM / G.726 Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b / g / n IEEE802.11b: 11Mbps (Max.); Data Rate IEEE802.11g: 54Mbps (Max.); IEEE802.11n: 150Mbps (Max.). Network Frequency bands 2412-2472MHz Maximum power 18dBm Wireless Security WEP, WPA, WPA2 Remote Access IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, RTSP, Network Protocol...
  • Page 83 Aperture F1.2 º When f=4mm, Horizontal: 70º, Diagonal: 78 Angle of view f=2.8mm, Horizontal: 106 º , Diagonal: 118º When Image Compression H.264 Image Frame Rate 30fps (60Hz), 25fps (50Hz), downward adjustable 1080P (1920 * 1080), 720P (1280 * 720), VGA (640 * Resolution 480), QVGA (320 * 240) Stream...
  • Page 84 Certification FCC, IC, CE, RoHS, IP66 ITEMS FI9800P Sensor High Definition Color CMOS Sensor Image Sensor Display Resolution 1080 * 720 (1.0M Pixels) Min. Illumination 0 Lux (With IR Illuminator) Lens Type Glass Lens focal length f:2.8mm Aperture F1.2 Lens Horizontal: 70º...
  • Page 85 Reset Reset button is available Power Supply DC 12V / 1.0A Power Power Consumption 4.2 Watts (Max.) Dimension (L * W * H) 97mm * 67mm * 64mm / 3.8in * 2.6in * 2.5in Physical Net Weight 350g / 0.8lb Waterproof IP66 Operating...

  • Page 86: Ce & Fcc

    Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Browser Google Chrome; Apple Safari. Motion Detection Alarm via E-mail, upload alarm snapshot to FTP Privacy Block Set privacy area manually Other User Accounts Three levels user role Features Firewall Supports IP Filtering Reset Reset button is available...

  • Page 87: Warranty

    No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications.
  • Page 88 Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. ...

  • Page 89: Statement

    FOSCAM, shall be the repair or replacement of defective parts. If FOSCAM lists a product on its website specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it without incurring any liability.

  • Page 90: Obtaining Technical Support

    Foscam company does not need to take any responsibility of the special, incidental or corresponding loss by the products of our company or any software provide by our company, including but not limited to operating loss, profit or purpose. The company only takes the responsibility applicable to national and local legal requirements.
  • Page 91 CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html https://www.foscam.com/Images/ce/DeclarationofConformitydownload(Germany).pdf Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China, 518055...

This manual is also suitable for:

Fi9903pFi9900pFi9800pFi9900epFi9901epFi9915b ... Show all

Table of Contents