Table of Contents
Advertisement
Power the transmitter on; pair the mobile device and transmitter on the Bluetooth menu.
Not connected
1. Enter the main app interface and tap the
Settings cog on the upper right-hand corner.
Parameters
Controller
Bluetooth connection settings
Open the remote control switch, click "Refresh" button
HUBSAN HT009_XXXXXX
Refresh
4. The interface will then show the "Bluetooth connection settings"
menu. Select the HUBSAN HT009_XXXXXX and confirm to connect.
When the Bluetooth connection is successful, the interface will say, "Bluetooth connection
successful". The HT009 transmitter will beep; the Bluetooth connection LED will turn solid.
5.4 Compass calibration
The compass must be calibrated every time the aircraft is powered on. The compass is
susceptible to interference by other electronic equipment, magnetic interference and metal,
which can lead to erratic behavior and loss of control. Regular calibration helps keep the
compass and its readings accurate.
Settings
Map
to refresh the Bluetooth list
Parameters
Joystick operating mode
Junior
Using remote control
2. Tap "Controller" and then "Using remote control".
Relay
Others
Connect
18
Controller
Map
Senior
Turn on Bluetooth
An app on your device wants to
turn on Bluetooth and make your
device discoverable by other
devices for 250 seconds. Allow?
DENY
3. The device will request permission
to use Bluetooth. Tap "Allow" to continue.
Relay
ALLOW
Advertisement
Table of Contents
