Compass Calibration; Starting / Stopping The Motors - UBSAN Zino MINI SE User Manual

Compass Calibration

When using the drone for the very first time, the compass calibration message will pop
up before take-off. Follow the instructions on your screen, rotate the drone horizontally,
then point the drone nose to ground and rotate it clockwise. The compass calibration
message will disappear once it is completed. You must complete the compass
calibration before flying the aircraft for the first time.
The compass is susceptible to interference from other electronic devices, resulting in
abnormal flight data. Regular calibration helps to keep the compass and its readings
accurate. select "Compass Calibration" under APP setting interface.
Compass 1 Compass 2

Starting / Stopping the Motors

Motor starting condition
1. The aircraft, remote control, and mobile phone have been connected successfully.
2. The aircraft compass has been calibrated (APP doesn't prompt to calibrate the
compass).
3. The aircraft must be placed on a horizontally levelled ground.
4. Aircraft has not locked sufficient GPS satellites for positioning. Please don't force take-
off.
5. The power of the drone should be ≥15%.
27