Related Manuals for UBSAN H216A X4 STAR PRO
Summary of Contents for UBSAN H216A X4 STAR PRO
- Page 1 ® H216A X4 STAR PRO H216A Quick Start Guide Version 1.0...
-
Page 2: A P P Dow Nlo Ad
A P P Dow nlo ad X-Hubsan APP Download Users will need the X-Hubsan app to operate this aircraft. Please download X-Hubsan from the App Store (iOS) or Google Play (Android). iOS X-Hubsan Download Android X-Hubsan Download The first flight configuration: aircraft + mobile device (phone/tablet) Step 1 Download the X-Hubsan APP. - Page 3 Step 2 Compass calibration: Please follow the app’s prompts to calibrate. Step 3 Takeoff: (two ways; see directions below) Please begin flight only when you have 6 or more GPS satellites. Waypoint/Return to Home/Orbiting/Follow Me modes are then accessible. Note: GPS cannot be accessed indoors.
- Page 4 Step 4 Landing: (three ways; see directions below) 1) Manual landing (with the virtual joysticks): Slowly pull the throttle down until the copter has completed its descent to the ground. Disarm the motors by simultaneously pulling both sticks diagonally down-out (below). When the motors have completely stopped, release the joysticks.
- Page 5 The second flight configuration: Aircraft + HT009 Transmitter+ Smartphone Users may fly in Mode 1 (right hand throttle) or Mode 2 (left hand throttle) with the remote control. This manual will introduce flight in Mode 2. The left joystick will control the height and the rotation;...
- Page 6 Step 2 Compass calibration: Please follow the app’s prompts to calibrate. Step 3 Power the transmitter on; pair the mobile device and transmitter on the Bluetooth menu. Not connected Parameters Controller Relay Joystick operating mode Settings Junior Senior Using remote control 1.
- Page 7 Step 4: Takeoff (two options) a) Manually takeoff Simultaneously pull the transmitter joysticks diagonally down-out to arm the motors. Pull the throttle upwards (slowly and gently) to takeoff (as shown in the side figure). off (as sh b) Auto Takeoff Please confirm that conditions are safe for take-off.
- Page 8 b) Auto Land: Please confirm that conditions are safe for a landing. Then, long press the Auto Land key. The aircraft will descend automatically, land and disarm. (see side figure) c) Return to home: Long press for the Return to Home key for 1.5 seconds and the quadcopter will perform a Return to Home.
- Page 9 H 2 1 6 A F r e q u e n t l y A s k e d Q u e s t i o n s 1.Cannot arm the drone’s motors/the drone’s motors will not start Please confirm that 1) the compass has been calibrated and 2) the aircraft has 6 or more GPS satellites.
- Page 10 G et tin g to kn o w y ou r H 2 16 A Thank you for purchasing a HUBSAN product. The H216A is an easy to fly aircraft capable of a variety of flight functions. It is equipped with a full-function remote control. Please read and follow the manual carefully for proper operation and use.
- Page 11 Mobile Device frame Joystick Joystick Power key Auto Takeoff/Auto Land Return to Home Transmitter status LED Bluetooth status LED G e t t i n g t o k n o w t h e X - H u b s a n A P P X-Hubsan is a flight control APP designed for HUBSAN WIFI-enabled aircraft.
-
Page 12: Aircraft Led Indicators
A p p e n d i x 1. Aircraft LED indicators H216A has 4 LEDs; the fore/frontal LEDs are blue and the rear LEDs are red. The LED status indications are defined as follows: Function LED status indication Power on and start up All 4 LEDs flash simultaneously Calib. - Page 13 Note Mind the differing colors of the A and B propeller screws! Propeller A Propeller B 1) Installation: Before installing propellers for the first time, please check that each Propel- ler A is matched with motor A and each Propeller B is matched with motor B. Align the "I" with the flat side of the "D"...
- Page 14 Notice：Read the instruction manual carefully before use. Propellers may cause injury; caution! Do not leave the quadcopter charging unattended. Always Warning: disconnect the quadcopter from the charger immediately after charging is complete. This is not a toy, not suitable for children under 14. www.HUBSAN.com Product Name：X4 STAR PRO Company：Shenzhen Hubsan Technology Co., Ltd.
- Page 15 Remark: 1) The remote (HT009) Using Bluetooth, other information is as follows: Product: Hubsan Bluetooth Transmitter Model No.: HT009 FCC ID: 2AN75-T009TX Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Page 16 2) The drone (H216A) Using WIFI, other information is as follows: Product: HUBSAN X4 Desire Pro Model No.: H216A FCC ID: 2AN75-216ARX Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.