Playback - Sony VENICE MPC-3610 Operating Instructions Manual

Digital motion picture camera
Hide thumbs Also See for VENICE MPC-3610:
Table of Contents

Advertisement

000
54
3. Camera Operations

Playback

You can play recorded clips while the unit is in
standby mode.
[Note]
The playback controls appear on ITEM keys 1 to 6
(page 7). Press an ITEM key to select the corresponding
item.
1
Insert the SxS memory card to play .
2
Press the CLIPS button (page 8) on the
Assistant side.
The clip list on the active playback media
appears on the sub display.
3
Press the
button (ITEM key 2),
(ITEM key 5), or MENU dial to select a clip to
play.
4
Press the MENU dial or the Play button (ITEM
key 3).
The playback image appears on the viewfinder
screen.
12:34:56:00
A001C001
Play
XCON ST
AXS
A
Playback operations
Playback operation is performed using the buttons
on the sub display (page 53).
Play/Pause button: Pause playback. To resume
playback, press this button again.
F Fwd button/F Rev button: Fast forward/reverse.
To return to normal playback, press the Play/
Pause button.
Stop/Clips button: Stop playback and return to the
clip list screen.
Monitoring audio
button
In normal playback mode, you can monitor the
recorded audio through the built-in speaker
(page 6) or connected headphones.
When headphones are connected to the
headphones connector (page 6), the built-in
speaker is turned off.
You can select the channel to monitor and adjust
the volume using Audio category > Monitor CH
and Monitor Level (page 38) in the menu.
120
min
BAT
Cueing up
To play from the start of a clip, press the Prev
button on the sub display (page 27).
You can skip clips and cue-up another clip
by pressing the Prev button or Next button
repeatedly.
1
2
Switching the SxS memory cards
When two SxS memory cards are loaded, press
the SLOT SELECT button (page 7) to switch
memory cards.
[Note]
You cannot switch SxS memory cards during playback.
Continuous playback of cards in slots A and B is not possible.
Switching to an AXS memory card
You can quickly play video recorded on an AXS
memory card in the AXS-R7.
To switch to an AXS memory card, press ITEM key
1 (page 27) on the sub display.
The playback signal is output from the output
connector of the unit.

Advertisement

Table of Contents
loading

Table of Contents