Operations On The Home Screen Of The Sub Display - Sony VENICE MPC-3610 Operating Instructions Manual

000 29 3. Camera Operations

Operations on the Home Screen of the Sub Display

Basic Operation
1
Press the HOME button.
The Home screen appears.
FPS EI
24 500
Fixed-
00:00:00:00
TCG 23.98fps 4K 4:3 2x SV
REC DC IN 15.0 V Reel A001 Shot
120
SxS A min XAVC QFHD C480
180
SxS B
min
1.8
Look
SDI 3/4: 3200
SxS: Log
ND
2
Select the item to set using the ITEM keys 1 to
6.
The setting value for items that can be
changed are displayed in orange.
The following diagram shows an example
when ITEM key 3 is pressed.
Step / Cont.
22.5
Current:
45.0
144.0
Use buttons or
90.0
(1/59.95 sec) dial to select.
144.0
172.8
Step Edit
3
Move the cursor to the item or setting value to
select using the button (ITEM key 2),
button (ITEM key 5), or MENU dial.
4
Press the MENU dial or Set button (ITEM key 3)
to apply the setting.
Changing the brightness of the sub display
You can change the brightness of the sub display
using Technical > Control Display > Brightness
level (page 50) in the full menu.
On the Home screen, you can also press and hold
the BACK button and turn the MENU dial clockwise
Shutter
to change the brightness of the sub display in the
90.0
sequence Minimum  Low  Mid  High with
the current setting as the base point.
C004
You can also press and hold the BACK button and
Sub
turn the MENU dial counterclockwise to change
1 2
the brightness of the sub display in the sequence
+
03 High  Mid  Low  Minimum with the
current setting as the base point.
WB
[Note]
The display brightness setting is common to both the sub
display and the mini display, and is reflected on both displays
simultaneously.
Set
Cancel
Step Edit Operation
You can change the settings available for selection
when "Step Edit" is displayed for ITEM key 4 in step
2
in the basic operation. You can add and delete
settings on the settings edit screen.
1
On the settings selection screen, move the
cursor to the setting you want to change or
delete, and press the Step Edit button (ITEM
key 4).
The settings edit screen appears.
+
Step Edit
Use buttons or
90.0
dial to select.
-
Delete Cancel
Add
2
To delete a setting, press the Delete button
(ITEM key 4).
[Note]
The selected setting can be deleted if the "Delete"
character string is displayed in orange.
3
Press the button (ITEM key 2), button
(ITEM key 5), or MENU dial to change a setting.
4
When finished, press the Add button (ITEM key
4).
The setting is added and the display returns to
the setting selection screen.
[Note]
A setting can be added if the "Add" character string is
displayed in orange.
When setting White Balance
On the White Balance settings edit screen, you
can press the Coarse/Fine button (ITEM key 1) to
change the 1-step increment variation to coarse
or fine. You can also press the Temp/Tint button
(ITEM key 3) to switch the value between color
temperature (Temp) and color tone (Tint).
+
Coarse / Fine Temp / Tint
Step Edit
Use buttons
or dial to
3200K +03
User Preset
select temp.
Base:
3200 K + 03
-
Cancel
Delete
Add