Sony VENICE MPC-3610 Operating Instructions Manual page 49

000 49 3. Camera Operations: Full Menu List
Technical Menu
Default values are shown underlined and in
Technical > Test Signals
Makes settings related to color bars.
Menu item Settings
Color Bars On/Off
Color Bars Type ARIB/SMPTE
1KHz Tone on Color On/Off
Bars
Test Saw On/Off
Technical > Switch & Rec Light
Makes settings related to the REC button.
Menu item Settings
Lock Operator Side without Rec Button/with Rec
Button
Lock Assistant Side without Rec Button/with Rec
Button
Rec Light On/Off
Rec Start/Stop Beep On/Off
Technical > System Configuration
Makes settings related to control of the unit.
Menu item Settings
Fan Control Auto/Max/Off in
Off in Rec/Max
Lens Interface Type C/Off
bold text.
Description
Turns color bars on/off.
Selects the type of color bars.
Turns the function to output a 1 kHz test signal in
color bars mode on/off.
Turns the test signal on/off.
Description
Sets whether to lock the REC button operation
when buttons are locked using the LOCK switch
on the Operator side.
Sets whether to lock the REC button operation
when buttons are locked using the LOCK switch
on the Assistant side.
Turns the REC lamp on/off.
Turns the function to emit a beep sound when
recording starts and stops on/off.
Description
Rec/Auto/ Selects the fan control mode.
Auto: Controls the fan automatically in response
to the internal temperature.
Max: Fan rotates at maximum speed.
Off in Rec/Auto: The fan is silent when recording,
and operates automatically in response to the
internal temperature when not recording.
Off in Rec/Max: The fan is silent when recording,
and rotates at maximum speed when not
recording.
Sets the lens interface, before attaching a lens,
according to the lens type to attach.
[Note]
If changing this setting while the lens is attached to the
unit, turn the turn off and then on again.
Technical > System Configuration
Makes settings related to control of the unit.
Menu item Settings
SDI Rec Remote Off/HD SDI Remote I/F/Parallel
Trigger Rec
SD HDMI On/Off
Shutter Mode Speed/Angle
Technical > APR
Executes APR (Auto Pixel Restoration: auto adjustment of the image sensor).
Menu item Settings
APR Execute/Cancel
Reset Execute/Cancel
Technical > Battery
Makes settings related to batteries.
Menu item Settings
Near End:Info Battery 5% to 100% (5% increments)
End:Info Battery 0% to 5%
Near End:Sony Battery 11.5V to 17V (0.1V increments)
End:Sony Battery 11.0V to 11.5V (0.1V increments)
Near End:Other Battery 11.5V to 17V (11.8V) (0.1V
increments)
End:Other Battery 11.0V to 14V (0.1V increments)
Detected Battery Sony Info Battery/Sony Battery/
Other Battery/DC IN (12V)/DC IN
(24V)
Description
Selects the SDI remote mode control method.
Off: Disables remote control.
HD SDI Remote I/F: Uses HD SDI Remote control
method.
Parallel Rec: Uses valid flag control method.
Turns the function to set the HDMI output signal
to SD format on/off.
Selects the operating mode of the electronic
shutter.
Description
Executes the automatic pixel noise reduction
function (execute by selecting Execute).
Deletes white flecks added by execution of the
APR and automatic black balance adjustment
functions (execute by selecting Execute).
Description
Sets the threshold value at which the remaining
battery capacity indicator starts flashing when
using an InfoLithium battery.
Sets the threshold value for displaying the "Battery
End" warning when using an InfoLithium battery.
Sets the threshold value at which the remaining
battery capacity indicator starts flashing when
using a Sony non-InfoLithium battery.
Sets the threshold value for displaying the "Battery
End" warning when using a Sony non-InfoLithium
battery.
Sets the threshold value at which the remaining
battery capacity indicator starts flashing warning
when using a non-Sony battery.
Sets the threshold value for displaying the "Battery
End" warning when using a non-Sony battery.
Displays the result of automatic battery pack type
detection.