Sony VENICE MPC-3610 Operating Instructions Manual page 47

000 47 3. Camera Operations: Full Menu List
Monitoring > Frame Line
Makes settings related to lines and markers displayed on the output image.
Menu item Settings
Color White/Yellow/Cyan/Green/
Magenta/Red/Blue
Center Marker Cross/Open Cross/Dot
Safety Area 80%/90%/92.5%/95%
Aspect Ratio Type Line/Mask
Aspect Ratio Select 17:9/16:9/15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/2.39:1
Aspect Ratio Mask 0 to 15 (12)
Aspect Safety Area 80%/90%/92.5%/95%
Frame Line on On/Off
Playback
Monitoring > User Frame Line
Makes settings related to the user frame lines.
Menu item Settings
Width 3 to 479 (240)
Height 3 to 269 (135)
H Position Max. –476 to 476 (±0)
V Position Max. –266 to 266 (±0)
Monitoring > VF Display
Makes settings related to the viewfinder display.
Menu item Settings
VF LUT Log/s709/R709(800%)
Status Info On/Off
Description
Selects the display color of frame lines.
Selects the display form of the center marker.
Selects the safety zone range.
Select the display form of the aspect marker.
Line: Displays lines with color set by Color.
Mask: Displays a lower video signal level for areas
outside the marker area.
Selects the mode when displaying the aspect
marker.
Selects the brightness of the image outside the
aspect marker when Aspect Ratio Type is set to
Mask.
Selects the size (percentage of the entire screen)
of the aspect safety zone marker.
Turns the function to superimpose frame lines
during playback on/off.
Description
Sets the user frame line width (distance from the
center to the left and right edges).
Sets the user frame line height (distance from the
center to the top and bottom edges).
Sets the horizontal position of the center of the
user frame lines.
The setting range becomes narrower as the Width
setting increases above 3.
Sets the vertical position of the center of the user
frame lines.
The setting range becomes narrower as the
Height setting increases above 3.
Description
Selects the LUT to apply to the viewfinder output
image.
Turns the function to superimpose information on
the viewfinder output image on/off.
Monitoring > VF Display
Makes settings related to the viewfinder display.
Menu item Settings
Status Info Select Info. A/Info. B
Frame Line On/Off
Frame Line Select Frame Line A/Frame Line B
Color –99 to ±0 to +99
Monitoring > VF Function
Makes settings related to viewfinder functions.
Menu item Settings
Double Speed Scan On/Off
Peaking Frequency Normal/High
Zebra On/Off
Zebra Select 1/2/Both
Zebra1 Level 0% to 107% (41%)
Zebra1 Aperture Level 1% to 20% (10%)
Zebra2 Level 0% to 109% (61%)
Description
Selects the information to display superimposed
on the viewfinder output image.
Turns the function to superimpose frame lines on
the viewfinder output image on/off.
Selects the frame lines to display superimposed
on the viewfinder output image.
Adjusts the color depth of the viewfinder image.
Description
Turns the viewfinder double speed scan function
on/off.
Selects whether the peaking frequency is normal
or high during peaking.
Turns the zebra function on/off.
Selects the zebra pattern type (Zebra 1, Zebra 2,
Both).
Sets the display level of zebra 1.
Sets the aperture level of zebra 1.
Sets the display level of zebra 2.