Sony VENICE MPC-3610 Operating Instructions Manual page 12

000 12 1. Overview: Location and Function of Parts
18.
SDI output REC trigger indicator
Displays the SDI output REC trigger status.
State
Technical > System Configuration > SDI Rec Remote
Trigger in the full menu
Off
HD SDI Remote I/F
Parallel Rec
19.
Audio level meter indicators
Displays the levels of audio channels 1 and 2
while recording.
20.
Recording media state/remaining capacity
indicator for each media slot
Displays the state and remaining capacity of
the media in SxS memory card slots A/B and
AXS memory card slots A/B.
A mark on the left of "AXS" or "SxS" indicates
the recording target media.
An indicator on the upper right of the slot
A/B icon on the right of "AXS" or "SxS" indicates
the playback target media (green indicator
indicates media is being played).
A icon is displayed for media if a condition
occurs that could impact recording.
Display
Recording command
superimposed on the
SDI output
– (Blank)
Stop command Top: SDI
Bottom: Stop
Rec command Top: SDI
Bottom: REC
Stop command Top: SDI-P
Bottom: Stop
Rec command Top: SDI-P
Bottom: REC
21.
Recording media format (codec) indicator
Displays the format of the recording on an AXS
memory card or an SxS memory card .
22.
Recording status indicator
Displays the following recording operation
states of the unit.
Display Description
 ˎ During recording
Rec
Recording standby
Stby
23.
Clip name display
Displays the first 8 characters of the name of
the next clip to be recorded in recording
standby mode.
Displays the first 8 characters of the name of
the clip currently being recorded when
recording.
24.
Time data display
Displays the duration or timecode, depending
on the TC/Media category > TC Display setting
in the menu (page 36).
25.
Iris position indicator
Displays the iris position (only when a lens that
is compatible with the iris setting display
function is attached).
26.
Focus position indicator
Displays the focus position (only when a lens
that is compatible with the focus setting
display function is attached).
27.
Zoom position indicator
Displays the focal length of the zoom
(displayed only when a lens that supports the
zoom setting indicator is attached).
28.
Simultaneous recording status indicator
Displays the sub clip recording format in 1-slot
simultaneous recording mode (page 58).
29.
SxS Sub LUT indicator
Displays the LUT setting to register for a sub
clip in SxS 1-slot simultaneous recording
mode.
30.
SxS LUT indicator
Displays the LUT setting for SxS recording.
31.
Effective picture size indicator
Displays the effective picture size and whether
anamorphic de-squeeze conversion is applied,
set using Project category > Imager Mode in
the menu (page 36).