Sony VENICE MPC-3610 Operating Instructions Manual page 30

000 30 3. Camera Operations: Operations on the Home Screen of the Sub Display
LUT Operation
Setting a LUT
You can set a LUT for each output system using
ITEM key 5 on the Home screen.
1
Press ITEM key 5 on the Home screen.
The LUT selection screen appears.
Page 1 / 2 SDI 1/2
Log
Outputs
Look Info s709
Look
Edit Look Monitor
The LUT selection screen has two pages, and
you can switch the page by pressing ITEM key 1.
On page 1, you can set the LUT settings for SDI
1/2 (display only), SDI 3/4, Monitor, and HDMI.
On page 2, you can set the LUT settings for the
viewfinder, SxS Rec, and Sub Rec.
2
Select the output to set using ITEM keys 2, 3, 5,
and 6.
The settings edit screen appears.
3
Press the button (ITEM key 2),
(ITEM key 5), or MENU dial to change a setting.
4
Press the MENU dial or Set button (ITEM key 3)
to apply the setting.
Changing Preset Look
You can set a LUT when Look is selected on the
LUT selection screen using the Edit Look button
(ITEM key 4) on page 1 or page 2.
1
Press the Edit Look button (ITEM key 4) on the
LUT selection screen.
The Look selection screen appears.
File Info
Category
Preset look
Preset Look
SDI 3/4 s709
ACS CDL Active
Process 1D-3D-CDL
ACS CDL File 03: Scene4_Dark_160830
Load File
HDMI
2
Press the Select button (ITEM key 3).
The items that can be selected are displayed.
3
Press the button (ITEM key 2),
(ITEM key 5), or MENU dial to change a setting.
4
Press the MENU dial or Set button (ITEM key 3)
to apply the setting.
button
Home Screen Items on the Sub Display
The names of items and corresponding setting values are given below.
Default values are shown underlined and in
Item Description
FPS Displays the video frame rate. The setting is determined by the Project category >
Project Frame Rate setting (page 36) in the menu.
Select
Project Frame Rate
23.98
24
25
29.97
50
Done
59.94
Exposure Index Sets the EI value. The following settings are available.
button
Shutter Sets the electronic shutter angle/shutter speed.
Press the Step/Cont. button (ITEM key 1) to switch between step and continuous
selection methods.
Step: Select from up to 16 preset values registered as shutter steps. You can press
the Step Edit button (ITEM key 4) to change any setting from the preset value
after selection.
Cont.: Select an angle/speed within the supported range.
bold text.
Display
Fixed-24
Fixed-24
Fixed-25
Fixed-30
Fixed-50
Fixed-60
125EI/160EI/200EI/250EI/320EI/400EI/500EI/640EI/800EI/1000EI/
1250EI/1600EI/2000EI
Displays the following selection options depending on the Technical >
System Configuration > Shutter Mode (page 49) setting in the full menu.
Angle: Shutter angle indicator
Default selection options
360/180/172.8/144/90/45/22.5/11.2/5.6
Speed: Shutter speed indicator
Default selection options
1/24, 1/25, 1/30, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
[Note]
The default speed values for different Project Frame Rate (page 36) settings are
given below.
23.98/24: 1/24, 25: 1/25, 29.97: 1/30, 50: 1/50, 59.94: 1/60
1)