Loading A Disc - Blaupunkt BB16WH Owner's Manual

BB16BK/BB16WH
CD/MP3 operation
Discs for Playback
This system can playback all digital audio CD, MP3, WMA finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW ) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the STANDBY/FUNCTION button to choose CD mode.
2. Open the CD door. " OPEN " will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after reading
finished.
5. To remove the CD, press Stop button and open CD compartment lid, grasp the CD by its
edges, and carefully take it out.
Note:
1. To ensure good system performance; wait until the disc tray completely read the disc before
proceeding.
2. If no disc is loaded into the compartment, or the disc is placed upside down, the display will
show N0 CD.
Playing a disc
After loading a disc, playback starts from track 1 automatically.
To interrupt playback, press the Play/Pause button. The play indicator will flash and current
track no. will show on the display.
To resume playback, press the Play/Pause button again.
To stop playback, press the Stop button, the total number of tracks appears on the display.
Selecting a desired track/passage
To select a desired track
Press the Next/TUN.+ or prevous/TUN.- button repeatedly in stop mode or during play until the
desired track appears on the display.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the Next/TUN.+ or previous/TUN.- button to scan the current playing track at
high speed until desired passage appears, and then release the button. Playback will start
again from this point.
To select a song which track number exceeds 10（for MP3 disc only）
To select a song/track which number exceeds 10, Press the 10/fold./M.+ or 10/fold./M.- button
each time to skip forward/backward 10 tracks, then press the Next/TUN.+ or previous/TUN.-
button to select desired track. For example: to select the 17th track, press 10/fold./M.+ button,
and then press the Next/TUN.+ six times immediately.
To Select a desired folder（for MP3 disc only）
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the 10/fold./M.+ or 10/fold./M.-
button for about 2 seconds to skip to next/previous folder.
Program tracks
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99
tracks can be stored in the memory in any order.
1. In stop mode, press the PROG./MEM./P-MODE button, the "PROG" will flash and the P01
indicator will be on.
2. Press the Next/TUN.+ or previous/TUN.- button to select the first desired track to be
programmed.
3. Press the PROG./MEM./P-MODE button to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the Play/Pause button to start playback from the first programmed track.
6. Press the Stop button to stop program playback.
11