Basic Function; Volume Adjusting; Loading A Disc - Blaupunkt BB20BT Owner's Manual

BB20BT
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the tail of supplied AC power cord into AC socket on unit and the plug into household AC outlet. The batteries
will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT door. Install 6pcs UM-2 "C" size batteries (not included) into compartment.
Please follow correct polarities as indicated.
NOTE: when using battery, take off the AC cable from unit.
CAUTION:
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.

BASIC FUNCTION

SWITCHING ON THE UNIT
After connecting the power, p
CD/USB/BLUETOOTH/RADIO/AUX function.

VOLUME ADJUSTING

Rotate the VOLUME knob on unit to increase or decrease volume.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable (CD-R) discs, finalized
digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the FUNCTION button on unit to select "CD" mode.
2. Press the PUSH TO OPEN button to open the CD door, "OP" will be shown on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
The display will show a flashing "CD - - - - -", then the total number of tracks would be shown and the
playback will start from track.
5. To remove the CD, press STOP button to turn off the unit, then press the PUSH TO OPEN button to
open the CD compartment lid. Hold the CD by its edges, and take it out carefully.
Note:
1. Make sure the disc is stopped before opening the CD DOOR.
2. To ensure good system performance; wait until the unit completely reads the disc before further
operation.
3. If no disc loaded into the tray, or the disc is unreadable, the display will show "NO".
PLAYING A DISC
1. To pause playback, press
To resume playback, press
2. To stop playback, press
ress STANDBY button to turn on the unit. Press the FUNCTION button on unit to choose
/ button on unit. The current playing time will flash on the display.
/ button on unit again.
button on unit.
8