Table of Contents
Advertisement
17 | Keysight | PXI Vector Network Analyzer - Configuration Guide
Using a Non-Keysight Chassis
The M937xA can be successfully installed in a non-Keysight PXI chassis. Please use the following guidelines.
– Ensure that the chassis has an available PXIe or PXI-H slot which can be used by the M937xA.
– Ensure that the chassis and controller supports peer-to-peer PXI Express I/O switch topology.
– Ensure that controller selected is compatible with chassis.
Please contact your Keysight representative for more detailed information. For technical
assistance with non-Keysight equipment, please refer to the equipment manufacturer's website.
PC Requirements for M937xA PXIe VNA Control
Operating system
Processor speed
Available memory
Available disk space
Related Literature
For more detailed product and specification information refer to the following literature and web pages:
M937xA PXIe VNA, Data Sheet, M9370-90002
M937xA PXIe VNA, Startup Guide, M9370-90001
M937xA PXIe VNA, Brochure, 5992-0098EN
M937xA PXIe VNA, Flyer/Photo Card, 5991-4883EN
M9018A PXIe 18 slot Chassis, Data Sheet, 5990-6583EN
M9019A PXIe 18 slot Chassis, Data Sheet, 5992-1481EN
M9037A PXIe High Performance Embedded Controller, Data Sheet, 5991-3661EN
M9036A PXIe Embedded Controller, Data Sheet, 5990-8465EN
1. For a list of computers compatible with Keysight Technologies PXIe M9018A chassis, refer to Tested Computer Technical Note (literature no. 5990-7632EN).
Windows 7 and Vista
Windows 7 (32 & 64 bit)
Windows Vista, SP 1 & 2 (32 & 64 bit)
1.5 GHz dual core (x86 or x64) minimum,
2.4 GHz recommended
1 GB minimum
8 GB recommended
1.5 GB available hard disk space
1
www.keysight.com/find/pxivna
Advertisement
Table of Contents
Need help?
Do you have a question about the M9370A and is the answer not in the manual?
Questions and answers