Sherwood R-807 Operating Instructions Manual page 50

R-807 NETWORK AV RECEIVER
Setting the Wired Network Connection
cable is connected to the LAN/ETHERNET connector
properly and securely. For details, see "Connecting to
LAN cable" on page 21.
Ethernet
You can enable and set the Ethernet connection
automatically on the main unit.
You can set the Ethernet connection settings manually.
Menu item
Ethernet Device Inputs an Ethernet device name.
Sets the connection type as DHCP
Connection Type
or Static IP.
IP Address Inputs IP Address.
Netmask
DHCP function is disabled.
Inputs DNS address when the
DNS address
DHCP function is disabled.
Inputs Default Router when the
Default Router
DHCP function is disabled.
Note
When you set DHCP as a connection type, you
DNS address etc.
When you set Static IP as a connection type, you
entering the IP Address, etc. In this case, some
understand internet connections, contact your
internet service provider.
50
Setting Other Network Options
AP Name
Resolution
Display size
Factory Setting
Description
Viewing the Network Information
Network Information
You can view the detailed information of a connected
Passcode Information
You can view and change the passcode of the main
should input this passcode when you enable Soft AP
hotspot and try to connect the mobile device to the main
unit.
Menu item Description
Views and changes the name of
Sets the resolution of the video
output.
Adjusts the screen display size
manually.
Resets all the settings to the
factory default.