Auto Presetting; Tuning In To Preset Stations; Recording - Sherwood R-807 Operating Instructions Manual

Auto Presetting

1
Press and hold down
than 2 seconds.
begins to preset stations with a strong signals.
Up to 30 FM stations may be stored.
To stop auto presetting, press
again.
Note
stored to memory.

Tuning in to Preset Stations

1
Select FM TUNER as the input source.
2
Select a desired preset number by pressing
PRESET - or .

Recording

for more
the built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player or
up in the same way. (For details on connection, see
The receiver's volume, Audio parameters (the tone
controls, for example), and surround effects have no
effect on the recorded signal.
Some digital sources are copy-protected, and can
only be recorded in analog.
Some video sources are copy-protected. These
cannot be recorded.
1
Select the desired recording source.
INPUT SELECTOR
2
Start recording on the component.
3
Start play on the desired input.
The audio and video signals from the desired
input will be dubbed on the recorder and you
can enjoy them on the TV set and from the
Note
The volume and tone (bass and treble) settings
have no effect on the recording signals.
When recording the analog signals from CD,
AUX, F.AUX etc., be sure to select the analog
input.
Operating Your System
41