Troubleshooting; General; Sound - Sherwood R-807 Operating Instructions Manual

Troubleshooting

remedy the problem before requesting servicing. Should any problem persist, consult your nearest authorized dealer
or authorized independent company.
from the outlet and insert again to return to normal operating conditions.

GENERAL

Problem
The power does not turn on.
The system suddenly turns
off.
No sound is heard after a
function is selected.
Can't operate the remote
control.

SOUND

Problem
There is no sound from the
selected component.
Disconnect the power plug from the outlet, and connect again.
After about a minute (you won't be able to turn the main unit on during this time),
service company.
(See "CONNECTIONS" on page 11.)
Press MUTE to restore the sound.
Replace the batteries. (See page 7.)
Operate within 7 m, and 30° of the remote sensor.
Remove any obstacles, or operate from another position.
Avoid exposing the remote sensor on the front panel to direct light.
Press DIMMER on the control repeatedly to return to the default setting.
components.
and the main unit.
Ensure that the component is selected correctly.
equipment.
setting of the equipment. Refer to the operating instructions supplied with the
equipment.
Be sure to use a High Speed HDMI cable when you view images or listen to
sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission.
Audio signals (format, sampling frequency, bit length, etc.) transmitted from an
the connected equipment if the image is poor or the sound does not come out of
the equipment connected via the HDMI cable.
When the connected equipment is not compatible with copyright protection
of the connected equipment.
Remedy
Remedy
51