Geeetech Prusa I3 pro W User Manual page 21

5) Filament:
a. Diameter:
In this field you can enter the diameter of the filament, so that EasyPrint 3D could calculate the
extrusion rate correctly. The most commonly used filament diameters are 1.75mm and 3mm, but it
might be necessary to change this setting when using filament from other suppliers.
b. Extrusion temperature:
This is the temperature of the nozzle that is used during printing. The extrusion temperature
can differ per material. PLA, for example, needs a printing temperature of approximately 180
-230 °C, while ABS needs a higher temperature of 210 - 250 °C to properly extrude the plastic.
c. Hotbed temperature
For printers with a heated bed, the temperature of the heated bed can also be set here. We
recommend using 60 °C for PLA and 90 °C for ABS to ensure that the plastic sticks well to the
build plate.
6) Speed:
ShenZhen GETECH
CO.,LTD
www.geeetech.com
1 7