Geeetech Prusa I3 pro W User Manual page 19

ones. The numbers on the right of each figure are a rough estimate of material used and time taken
for a simple 20mm cube model. Note that this is only indicative, as model complexity and other
factors will affect time and material.
1. Line ：
2. Rectilinear
3. Concentric
4. Hilbert Curve
ShenZhen GETECH
CO.,LTD
www.geeetech.com
350.57mm/5m: 23s
344.51mm/5m: 20s
344.51mm/5m: 20s
1 5