Geeetech Prusa I3 pro W User Manual page 16

model proper.
a. Loops: The number of skirt lines printed around the model. One loop is usually sufficient.
b. Distance from object: The distance between the object and the skirt. The default of 6mm is
usually sufficient.
c. Skirt height: The number of layers to lay down a skirt for. For ensuring the material is
flowing smoothly, one layer is sufficient, however the skirt function can also be used to build walls
around the object in case it should be protected from draughts.
3) Retraction:
ShenZhen GETECH
CO.,LTD
www.geeetech.com
1 2