Maico easytymp Operation Manual page 48

Operation Manual easyTymp
Deleting Test Results Directly After Testing
Deleting a measurement is possible by pressing the button directly after having
finished a measurement and the Done! screen is shown. It is possible to delete
measurements of one or both ears. See section 5.5.4 for more information.
NOTE: Making a measurement on the same ear without having saved the previous
measurement will overwrite the previous test result.
Deleting Test Results in the Patient Management
Using the patient management it is possible to delete either single or all results of a patient
or one or all patients including test results. See section 5.5.13 on how to delete single or
all test results of a patient. See section 5.5.11 on how to delete a single or all patients
including test results.
NOTE: If the management system is getting activated or deactivated, a message box
warns that all measurement data will be deleted. Press to change the setting and
delete the data or to keep the settings. See also section 5.6.8.
5.7.3 Printing Test Results with the Thermal Printer
Print directly from the Done! screen (see section 5.5.4) or after viewing results via patient
management (see section 5.5.13).
5.7.4 Data Transfer Between easyTymp and Impedance Software Module
NOTE: Data transfer between the easyTymp and the Impedance Software Module is only
possible, if the patient management system is deactivated. See section 5.6.8 on how to
deactivate the patient management system.
It is not possible to transfer data from the patient management system to PC.
To transfer data between easyTymp and the Impedance Software Module, complete the
measurement and connect the easyTymp to the PC. Connection is made via the USB
cable inserted directly into the USB port on the device or placement of easyTymp in a
connected cradle. The transfer process will start automatically.
NOTE: The easyTymp cannot make a measurement if it is connected to the running
Impedance Software Module.
See the Software Operation Manual of the Impedance Software Module for more
information.
17/01/2018
8111254 Rev. 9 46