Table of Contents
Advertisement
Replacing the power-status light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the power-light board with the screw holes on the
palm-rest assembly.
2
Replace the screws that secure the power-light board to the palm-rest assembly.
3
Connect the power-light board cable to the power-light board and press down
on the latch to secure the cable.
Post-requisites
1
Replace the battery.
2
Replace the
base
36
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
