Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
Place the palm-rest assembly on the edge of a table with the keyboard facing
Align the screw holes on the hinges of the display assembly with the screw holes
on the palm-rest assembly.
Replace the screws that secure the display assembly to the palm-rest assembly.
Close the display.
Route the display cable and connect it to the system board
Route the antenna cables and connect them to the wireless card.
Replace the battery.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best