Download Print this page

Dell Inspiron 7547 Service Manual: Replacing The Heat Sink; Procedure; Post-requisites

Hide thumbs

Advertisement

Replacing the heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can damage the system
board and processor.
NOTE: The original thermal grease can be reused if the original system
board and heat sink are reinstalled together. If either the system board or
the heat sink is replaced, use the thermal pad provided in the kit to ensure
that thermal conductivity is achieved.
Procedure
1
Align the captive screws on the heat sink with the screw holes on the system
board.
2
Tighten the captive screws that secure the heat sink to the system board.
3
Adhere the mylar tape over the memory modules.
Post-requisites
1
Replace the battery.
2
Replace the
base
48
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before

Advertisement

This manual also for:

Inspiron 15 7000

Comments to this Manuals

Symbols: 0
Latest comments: