Table of Contents
Advertisement
Replacing the processor fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the processor-fan cable to the system board and adhere the mylar tape.
2
Align the screw holes on the processor fan with the screw holes on the system
board.
3
Replace the screws that secure the processor fan to the system board.
4
Route the display cable and connect it to the system board.
Post-requisites
1
Replace the battery.
2
Replace the
base
40
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
