Table of Contents
Advertisement
FM Display Modes
Every time you press the INFO button, the bottom line of the display will cycle through the
following display modes.
Programme Type
This describes the "Style" or "Genre" of music that
is being broadcast e.g. "Rock" or "Classical".
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo mode.
The receiver will automatically switch between
Stereo and Mono modes. You can however
override this function, so that you can manually
switch between Stereo and Mono modes, which is
helpful if you're listening to a poor FM signal.
To switch between mono and stereo,
press the SELECT button once, you will
see on the display "Auto" or "Mono". To
toggle between each mode just press
the SELECT button again.
Time/Date
Time and date will show on the display.
Time and date cannot be updated in
FM mode. To ensure correct time and
date is displayed, synchronise in DAB
mode first.
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the software
version of this unit.
2. The software version will automatically disappear after 5 seconds.
System Reset
There may be times when you need to reset your unit to the factory settings. If you
experience reception problems you may want to reset and try again. If you move the unit
to another part of the country and pick up the local and national stations in that area, your
previously tuned channels may no longer be available.
To reset the system, press and hold the DAB/FM button. Then press the SELECT button to
start the system reset. The unit will then start the Quick Scan for DAB channels immediately.
After system reset, all tuned stations, DAB & FM
preset stations will be erased.
12
Programme Type
Audio Mode
Time/Date
PS
Advertisement
Table of Contents
