Download  Print this page

Makita TM3000C Instruction Manual

Double insulation
Hide thumbs

Advertisement

INSTRUCTION MANUAL
Multi Tool
TM3000C
DOUBLE INSULATION
Read before use.

Advertisement

loading

  Summary of Contents for Makita TM3000C

  • Page 1 INSTRUCTION MANUAL Multi Tool TM3000C DOUBLE INSULATION Read before use.
  • Page 2: Specifications

    SPECIFICATIONS Model TM3000C Oscillation per minute 6,000 - 20,000 (min Oscillation angle, left/right 1.6 ° (3.2 ° total) Overall length 275 mm Net weight 1.4 - 1.5 kg Safety class EPTA-Procedure 01/2014, are shown in the table. Work mode: Cutting with segmental saw blade...
  • Page 3: General Power Tool Safety Warnings

    General power tool safety warnings protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used WARNING: Read all safety warnings, instruc- power tool. Failure to follow all instructions listed below Carrying power tools that have the switch on invites accidents. tions for future reference.
  • Page 4: Multi Tool Safety Warnings

    Power tools are dangerous in the hands of untrained users. tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges skin contact. Follow material supplier safety data. are less likely to bind and are easier to control. perform sanding operations.
  • Page 5: Functional Description

    WARNING: orbital stroke rate, turn the dial between 1 and 5. The higher the number is, the higher the orbital stroke rate is. Preset the dial to the number suitable for your workpiece. NOTE: from 5 to 1. Forcing the dial may damage the tool.
  • Page 6: Cutting, Sawing And Scraping

    Cutting, sawing and scraping CAUTION: (eg. towards either side) of tool application with no cutting edge. It may damage the tool. Application tool installation bolt 2. Hex wrench 3. Tighten Put an application tool (optional accessory) on the tool holes in the application tool and secure the application When using sanding application tool, mount the appli- cation tool on the sanding pad so that it matches the Put the application tool on the workpiece.
  • Page 7: Maintenance

    The use of any other accessories or attach- use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nozzle band 2. Protrusions 3. Holes attachment and then secure them with the applica- tion tool installation bolt.
  • Page 8 NOTE: tool package as standard accessories. They may differ from country to country. J an- B apt i s t Vi nk s t r aat 2, M ak i t a E ur ope N . V. 3070 K or t enber g, B el gi um 3- 11- 8, S um i y os hi - c ho, M ak i t a C or por at i on A nj o, A i c hi 446- 8502 J apan...