SPECIFICATIONS Model TM3000C Oscillation per minute 6,000 - 20,000 (min Oscillation angle, left/right 1.6° (3.2° total) Overall length 275 mm Net weight 1.4 kg - 1.5 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Do not touch the power plug with wet hands. Power tool use and care 10. If the cord is damaged, have it replaced by the Do not force the power tool. Use the correct manufacturer or his agent in order to avoid a power tool for your application.
Page 4
22. Keep bystanders a safe distance away from Use clamps or another practical way to secure and support the workpiece to a stable plat- work area. Anyone entering the work area form. Holding the work by hand or against your must wear personal protective equipment.
Constant speed control FUNCTIONAL DESCRIPTION Electronic speed control for obtaining constant speed. Possible to get fine finish, because the orbital stroke WARNING: rate is kept constant even under load condition. • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Failure to switch off and ASSEMBLY unplug the tool may result in serious personal injury from accidental start-up.
Put an application tool (optional accessory) on the tool Cutting, sawing and scraping flange so that the protrusions of the tool flange fit in the holes in the application tool and secure the application CAUTION: tool by tightening the bolt firmly with the hex wrench. When using sanding application tool, mount the appli- • Do not move on the tool forcibly in the direction cation tool on the sanding pad so that it matches the (eg.
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Segment saw blade • Round saw blade •...
Page 8
• Polishing felt delta • Hex wrench • Dust extraction attachment NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. Makita Corporation 885123D3 20181130 www.makita.com...