Routine Maintenance; Replacement Parts; Recommended Accessories; Service - Inogen At Home User Manual

Clean the particle filter with a mild liquid detergent (such
as Dawn ) and water; rinse in water and dry before reuse.
TM
Ensure the filter is completely dry before reinstalling into the
concentrator.
Air Inlet Filter
Replace when filter is dirty according to visual indicator.
The air inlet filter may be replaced by the equipment provider
or by the user.
Output Filter
The output filter is intended to protect the user from
inhalation of small particles in the product gas flow. The
device includes an output filter conveniently located behind
the removable cannula nozzle fitting. Inogen requires that this
filter be replaced between patients.
The output filter may be replaced by the equipment provider or by the user.

Routine Maintenance

No special maintenance, other than weekly particle filter cleaning, needs to be
carried out by the user.

Replacement Parts

Contact your home care provider if you have any questions about equipment.
Use only the following replacement parts:
• Inogen At Home Particle Filter (RP-400)
• Inogen At Home Output Filter Replacement Kit (RP-107)
• Inogen At Home Air Inlet Filter (RP-401)
• Inogen At Home Column Pair (RP-402)
• AC Power Cord (RP-109)

Recommended Accessories

• Humidifier Connector Tube (Salter Labs #S0-676)
• Humidifier Bottle (Salter Labs #7600)
• Nasal Cannula (Salter Labs #16SOFT)

Service

The concentrator is specifically designed to minimize routine preventative
maintenance.
11
Particle Filter
Air Inlet
Filter