Table of Contents
Advertisement
6.4.2 Time Mode
Caution!: When you are operating the machine in Time Mode, be sure that
the workpiece is not overheated. Overheated workpiece may give
damage to the workpiece and/or the machine.
•
In the main menu you will have two different heating modes. Press button 4 to
operate the machine in Time Mode.
5.4 TIME MODE
•
Set the time with pressing button 5 or button 6 .
•
If you did not choose power level, choose one of the levels according to guidelines
in section 6.2.
•
If you want to check workpiece's temperature, be sure that Magnet Sensor
connected well and placed correctly as shown in section 6.3.
•
Press button 5 (ON/OFF) to start operation. When the operation start you will see
the screen below. Your set time will appear next to "TIME LEFT=" and you will see the
workpiece's temperature next to "PART TEMP="
13/16
FeniX
Induction Heaters
Advertisement
Table of Contents
Need help?
Do you have a question about the 45 Turbo and is the answer not in the manual?
Questions and answers