Front Panel Features - Lanner MR-301 User Manual

Chapter 1

Front Panel Features

F1 LED Indicators for ADSL and WAN
The ADSL LED indicates the connection status of the ADSL services, whereas the WAN LED indicates the connection status
of the Internet service.
Speed LED (Green/Amber):
LED
LINK/ACT (Yellow)
SPEED (Green/Amber)
F2 LED Indicators for 4 LANs
The LAN4/LAN3/LAN2/LAN1 LED indicates the connection between the port and the next piece of network equipment.
LED
LINK/ACT (Yellow)
SPEED (Green/Amber)
F3 Power/Status/HDD LED
Power LED (Green):
Green indicates that the system is powered on.
Status LED (Green/amber):
This LED is programmable. You could program it to display the operating status with the behavior like the following:
If the LED is green, it indicates that the system's operational state is normal. If it is amber, it indicates that the system is
malfunctioning. For sample code, refer to the Drive and Manual CD.
HDD LED (Yellow):
It is an LED indicator for the hard disk. If it is flashing, it indicates data access activities. Otherwise, it remains off.
Network Application Platforms
F1
Behavior
On/Flashing
Off
Amber The connection speed is 1000Mbps.
Green The connection speed is 100Mbps.
Off The connection speed is 10Mbps.
Behavior
On/Flashing
Off
Amber The connection speed is 1000Mbps.
Green The connection speed is 100Mbps.
Off The connection speed is 10Mbps.
F2
Interpretation
The port is linking.
The port is not linking.
Interpretation
The port is linking.
The port is not linking.
Introduction
F3
3