Table of Contents
Advertisement
3 – Installation
3.6 Cable Connections
Run the PathFindIR II to ECU Cable between the camera and ECU, observing that each end of the
cable can only connect to either the camera or the ECU. Connect each end of the cable making sure
the connections are seated securely.
Connect the other end of the Power/Video cable as follows:
334-0050-00-10, version 100 Feb 2014
Find Quality Products Online at:
Connect the Power/Video Cable to the ECU connector designated with the Power indication,
as indicated with the black arrow in the image.Do NOT connect the Video/Power cable to the
connector indicated with a red X.
Caution: Be careful to connect the Power/Video cable to the correct ECU
connector. If the cable is connected to the wrong connector and power
is supplied to the ECU, it will result in permanent damage to the ECU
which is not covered under warranty..
• Red - VDC+
• Black - VDC-
• BNC - Video monitor
GlobalTestSupply
www.
15
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
