General Safety Summary - Tektronix TDS200 Series Operator Training Kit Manual

General Safety Summary

Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as specified.
While using this product, you may need to access other parts of the
system. Read the General Safety Summary in other system manuals
for warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly.
or test leads while they are connected to a voltage source.
Connect the ground lead of the probe to earth ground only.
Replace Batteries Properly.
and rating specified.
Use Proper AC Adapter.
product.
Use Proper Fuse.
product.
Avoid Exposed Circuitry.
components when power is present.
Do Not Operate With Suspected Failures.
to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
TDS200 Operator Training Kit Manual
Do not connect or disconnect probes
Replace batteries only with the proper type
Use only the AC adapter specified for this
Use only the fuse type and rating specified for this
Do not touch exposed connections and
If you suspect there is damage