Bosch ARD-FPBEW2-IC Installation Manual page 5

FPBE W2 Fingerprint Reader
Caution!
Product damage or physical injury
!
Do not install the power supply cable in a place where
people pass by.
Notice!
Risk of product damage or malfunction
Do not install the product near a highly magnetic object
such as a magnet, TV, (especially CRT) monitor, or speaker.
If installing the product outside where the product is
completely exposed, install the product together with the
enclosure.
When installing a number of devices, allow a space between
the devices for installation.
Do not drop the product or apply an impact to the product.
Do not to contaminate or damage the fingerprint contact
unit with a dirty hand or foreign substances.
When cleaning the product, wipe the product with a soft
and dry cloth and no water, benzene or alcohol.
Notice!
For further information on this product
download the Installation Manual and
firmware at our website:
http://www.boschsecurity.com.
Go to Products > Access Control Systems > Readers and
Cards > Biometric readers.
Bosch Access Systems GmbH
Safety | en
2018-02 | ARD-FPBEW2-IC |
5