Power Supply Connection - Bosch ARD-FPBEW2-IC Installation Manual

20
en | Installation
3.2

Power supply connection

Notice!
Use a power supply adaptor of DC 12 V (± 10%) with a
minimum of 600 mA which has obtained the approval of
IEC/EN 60950-1. If you wish to connect and use another
device to the power supply adaptor, you should use an
adaptor with a current capacity which is the same or larger
than the total power consumption required for the terminal
and another device.
2018-02 | ARD-FPBEW2-IC |
FPBE W2 Fingerprint
Bosch Access Systems GmbH
Reader